Search This Blog

Pages

Header Ads Widget

Responsive Advertisement
Showing posts with label Internet. Show all posts
Showing posts with label Internet. Show all posts

Sunday, 3 September 2017

Lesson 1 How to Back Up Windows Registry

HACKING WINOWS 1.0 [Startup Lesson]

Heys Guys ,
Firstly a big SORRY for late sratup of this course.
So without wasting lets start. Before doing any trick or i say technique first "YOU ARE REQUIRED TO TAKE BACKUP OF YOUR WINDOW REGISTRY"
...................................................................................................................................................................
Playing Around with the windows registry can be dangerous things to do.Sometimes due to some human error or if something goes wrong while editing the Registry, it is possible for your computer to malfunction. Hence, before playing around with the Windows Registry, it may be a good idea to create a backup copy which allows you to recover yur computer even if something goes wrong . If you are using Windows 7, then follow these steps which i have provided :
....................................................................................................................................................................
Step 1 : Right click on COMPUTER and click on Properties.
Step 2 : Click on the SYSTEM PROTECTION option from the left pane.
Step 3 : Press the CREATE button and Windows will create a restore point  to which your computer can be restored in case of any problems while editing the Registry.
..................................................................................................................
So guys do it..
And pack your belts because from tommorow one by one we teach you all about windows 7.
hope you guys liked it
keep visiting
See you tommorow
Stay protected guys
#Like And #Share
hackingwindows, windowshacking, stay protected, education, hack, hacking course, how to, window7, 

Monday, 21 August 2017

How to check if someone is using fake profile picture

 [FAKE PROFILE BUSTED]😎😎😎😎😎
Hello guys, Today I'm going to tell you how to find out if someone is using fake profile picture.  There is online website named as TinEye, By using this website website we will easily able to know how many people using this profile picture and where.

About TinEye..........
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TinEye is a reverse image search engine. It finds out where an image came from, how it is being used, if modified versions of the image exist, or if there is a higher resolution version.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Just Follow these easy steps:
1. First of all visit TinEye.
2. Upload that that profile picture or simply paste the URL of that picture.
3. Now press search and it will show you  results and now you can easily check that from where this image is come from and how it being used.

Enjoy &Keep Visiting...
.And if u want more tricks follow me...

Friday, 22 August 2014

Change your IP address


 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


    Click on "Start" in the bottom left corner of the screen.
    Click on "RUN"
    Type in "command" and click OK


      You should be now at MSDOS prompt Screen

    Type "ipconfig /release" just like that, and press "enter"
    Type "exit" and leave the prompt
    Right-click on "Network Places" or "My Network Places" on your desktop.
    Click on "properties"


     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

     Right click on "Local Area Connection" and click "properties"
    Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
    Click on "Use the following IP address" under the "General" tab
    Create an IP address (It doesn't matter what it is)
    Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
    Press the "Ok" button here
    Hit the "Ok" button again


     Now you should be back to the "Local Area Connection" screen.

    Right-click back on "Local Area Connection" and go to properties again.
    Go back to the "TCP/IP" settings
    This time, select "Obtain an IP address automatically"
    Click on "Ok"
    Hit "Ok" again.
    Now you have a New IP address.

 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


  • Click on "Start" in the bottom left corner of the screen.
  • Click on "RUN"
  • Type in "command" and click OK

      You should be now at MSDOS prompt Screen

  • Type "ipconfig /release" just like that, and press "enter"
  • Type "exit" and leave the prompt
  • Right-click on "Network Places" or "My Network Places" on your desktop.
  • Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

  •  Right click on "Local Area Connection" and click "properties"
  • Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
  • Click on "Use the following IP address" under the "General" tab
  • Create an IP address (It doesn't matter what it is)
  • Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
  • Press the "Ok" button here
  • Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

  • Right-click back on "Local Area Connection" and go to properties again.
  • Go back to the "TCP/IP" settings
  • This time, select "Obtain an IP address automatically"
  • Click on "Ok"
  • Hit "Ok" again.
  • Now you have a New IP address.
- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf
 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


  • Click on "Start" in the bottom left corner of the screen.
  • Click on "RUN"
  • Type in "command" and click OK

      You should be now at MSDOS prompt Screen

  • Type "ipconfig /release" just like that, and press "enter"
  • Type "exit" and leave the prompt
  • Right-click on "Network Places" or "My Network Places" on your desktop.
  • Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

  •  Right click on "Local Area Connection" and click "properties"
  • Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
  • Click on "Use the following IP address" under the "General" tab
  • Create an IP address (It doesn't matter what it is)
  • Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
  • Press the "Ok" button here
  • Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

  • Right-click back on "Local Area Connection" and go to properties again.
  • Go back to the "TCP/IP" settings
  • This time, select "Obtain an IP address automatically"
  • Click on "Ok"
  • Hit "Ok" again.
  • Now you have a New IP address.
- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf
 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


  • Click on "Start" in the bottom left corner of the screen.
  • Click on "RUN"
  • Type in "command" and click OK

      You should be now at MSDOS prompt Screen

  • Type "ipconfig /release" just like that, and press "enter"
  • Type "exit" and leave the prompt
  • Right-click on "Network Places" or "My Network Places" on your desktop.
  • Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

  •  Right click on "Local Area Connection" and click "properties"
  • Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
  • Click on "Use the following IP address" under the "General" tab
  • Create an IP address (It doesn't matter what it is)
  • Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
  • Press the "Ok" button here
  • Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

  • Right-click back on "Local Area Connection" and go to properties again.
  • Go back to the "TCP/IP" settings
  • This time, select "Obtain an IP address automatically"
  • Click on "Ok"
  • Hit "Ok" again.
  • Now you have a New IP address.
- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf
 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


  • Click on "Start" in the bottom left corner of the screen.
  • Click on "RUN"
  • Type in "command" and click OK

      You should be now at MSDOS prompt Screen

  • Type "ipconfig /release" just like that, and press "enter"
  • Type "exit" and leave the prompt
  • Right-click on "Network Places" or "My Network Places" on your desktop.
  • Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

  •  Right click on "Local Area Connection" and click "properties"
  • Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
  • Click on "Use the following IP address" under the "General" tab
  • Create an IP address (It doesn't matter what it is)
  • Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
  • Press the "Ok" button here
  • Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

  • Right-click back on "Local Area Connection" and go to properties again.
  • Go back to the "TCP/IP" settings
  • This time, select "Obtain an IP address automatically"
  • Click on "Ok"
  • Hit "Ok" again.
  • Now you have a New IP address.
- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf