Disabling usb ports

Hey Guys,
I am back with a new trick
today i am gonna tell you how to disable usb ports
let see how to do

..........................................................................

1. Click on Start.
2. Click on Run. If you cannot find RUN, type it in the search box.
3. Type "regedit" without quotes. This will launch the Registry Editor.
4. Navigate to  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usbstor.
5. In the work area, double click on Start.
6. In the Value Data box, enter 4.
7. Click on OK.
8. Close Registry Editor and refresh your desktop.
9. To re-enable access to your USB ports, enter 3 in the Value Data box in Step 6

..........................................................................
 so this is the trick to disable usb ports any computer


hope guys you like it 
like ,share  and comment...............😎😎

Some More cmd tricks

Command Prompt is the one of most powerful tools for the  Windows so in easy word it’s a GUI based operating system .most of the people ignore that but  with the help of command prompt you can do many think like hacking .so here are some most used full command’s .

Open your command prompt  then Go window then search simple cmd

 1.Watch THE ASCII version of a Star Wars movie

so for all who are big fan of star wars movie, so then it’s simple trick just enter in the command prompt then just type telnet towel.blinkenlights.nl.

2. Know your IP add, DNS Server add and a lot more

  
with the help of Command Prompt you can easily fine the IP ,DNS server , host name , node type IP routing and wins proxy just type the ipconfig /all

3. Know that if the any neighbors are using your Wi-Fi connection

You can find with the help of command prompt that someone using your internet follow these step

Command Prompt can let you know if someone is connected to your Local Area Connection and then using it. Just follow the steps. 

1) Open the browser and visit a http://192.168.18.1 or its depending on your router ip. 

2) Then Find a tabs that are mentions with the “Attached Device” or  like similar.

3) Now you can find the IP address,the computer name, and the MAC add 

4 ) now finally you can Compare it with those displayed by router in Step 2.then If you are notice that someone strange devices so  then you’re neighbor has been using your internet .so then in this case change your setting like password

4. If hacker is hacking your computer so the Trace the Hacker

If you are interested to find that hacker so then using the command prompt you can find the hacker so then just execute netstat –a so then it will show the computer name that was connected with your computer . so now you can find the person easily.

5. Use Abort a Command

If you any command can be stopped so then just enter ctrl + C then you can change you line easily.

6. Hack the Prompt Text.

if you interested to hack the command prompt title so then its easily hacked

just enter the prompt like this prompt hacked by Noman Ramzan

7. Some Function From the Command Prompt

So this is just function from the command prompt like just go in the command prompt and then left click on that then you can see that there are some function like Mark, copy, select, paste and find so with the help of this function you can copy, select, mark and paste easily

8. Get help for the command prompt

Well let’s say you don’t know about the some command of this so then you can take simply you enter the cd/? For help so then work easily

10. Chat with your Friends with Command Prompt 

Hello my reader now you can chat with your friends easily with this simple trick . so then you just need you friend IP and your command prompt

1.     Open the office word or notepad  and paste this code
@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A

      2.     Now save this file with the “messenger.bat” then open your command prompt.

      3.     Drag the file (.bat file) over to the CP and then press enter.

      4.     So then CP show you the messenger and user

      5.     So in the user field you just enter your friend IP

      6.     So after that just enter you message want to send your friend

So this is a simple trick to chat with the command prompt so start chatting with him or her 

There are also lots of commands of the CP so i will try to define in my next article.

Thanks for the reading if you have any problem so then you can ask me .

How to check|Stop that Your computer HACKED or NOT

 The Computer hackers can the cause serious damage to most of computer and may be your personal information. 

Hacking can mean the number of things but the computer hacking is a basically when someone accesses into your computer or may be its resources. Without your permission and then initially may be without your knowledge. Computers can be the hacked without leaving any evidence behind that. As the home user and you can always find out that if you have been hacked by the black hat hackers because the black hat hacker either wants keep using your personal computer resources or may be want to harm the computer. As the black hat can try to access your computer.

So as I am security Researcher it’s my duty to stop the black hat hacker from the unethical work and also inform to the people about the all activity of those person. So here is simple trick that how you can check your computer that may hacked by hackers. So let’s start follows the some step .then you can easily check your computer is hacked or not. The lots of technique to stop the black hat hacker. So for my reader I am sharing simple technique so let’s start.

Technique # 01

Look for the extra folder like right click on the hard drive and check that how much your hard drive is used. If your computer is compromised by hacker  so the will see your memory lost mean that your pc may be being used to the file sharing .so now check your folder then you will see the some folder with the large memory.

Technique # 02

Check the user. Just Go to the Control Panel and then click on the "Users." So if may be any extra users have been added so may be your computer is hacked or if the some user password changed and then it’s confirm that your computer was hacked.

Technique # 03

Find out that if your security has been off .so check this Go to the Control Panel then look to see if the firewall turned off sometime or always and your ant virus is on and may be window update off so then your computer is hacked.

Technique # 04

Finally in last try to runs your antivirus and other software like remove to spyware. If your computer is hacked so it show the lot of spyware

HOW TO STOP HACKER’S

So finally some technique that how to stop the hacker’s from this activity .

STEP # 01

Open your command prompt the type netstat –b so its simple show you that some IP address associated with the all program engaged with the internet then The list will be update every five seconds and then simple giving you the real-time look IP addresses your computer is the sending information to and then Look for the IP addresses or may be program names that you cannot identify. So take the screen shot. And save it in your computer.

STEP # 02

Then you can Type tracert like "tracert" like below its give you all the information about the IP address like name and internet service provider .

STEP # 03

So finally Shut down the computer. And then Contact the ISP company and give the IP address and and alert your all the problem.so then may take action.

if you like then comment below.

How to hack via bluetooth

Today i am sharing very interesting trick that how to hack Bluetooth hacking software well you all are familiar with a term of hacking and now a days the people who are unaware of hacking losses their important data, credit card numbers and lots of other thing which are valueable.Well today I am sharing an interesting piece of hacking.People are amazed when they see hacker access a mobile phone with the Bluetooth and multimedia phones .But let me tell you its very simple.There are various hacks and lot ofsoftware already available on the different website which helps hackers to hack any cell phone and multimedia phones.In this post that I have outlined only Some Bluetooth Hacking Software and because these softwares are very effective to access any phone.

 And now here comes some of the softwares list of Bluetooth hacking software. 

1) Super Bluetooth Hack (awesome software)

This software is used for the reading information’s and controlling from remote cell phone via Bluetooth or infra .The Phone list and SMS can be stored in the HTML type. In addition to it that will display information about the battery, Sim card and network’s if you download the software  (Super Bluetooth Hack)  simply download it and use it.it is quite easy to use or if you want to install directly to your cell phone than follow the procedure below.

Download Super Bluetooth Hack 1.08 to Your Phone

1.Go to m.brothersoft.com on any browers of your phone

2.Enter Quick Download Page which links at the bottom of the page

3.Enter Code: 127249 to begin download

And more detail about the software so Detail about bluetooth hacking

 2) blue scanner

 The Blue Scanner searches out for the Bluetooth enabled a devices and then try to extract as the much information as possible for a each newly discovered device. Download this software so blue scanner download

 3) Blue Bugger

 This is simply exploits the Blue Bug (and name of the set of Bluetooth security holes) vulnerability of a Bluetooth enabled devices and then By exploiting these vulnerabilities hacker can access on the calls lists, phone-book and more information of that cell phone. Download Blue Bugger download

 4) BTbrowser

 This software BT Browser is the J2ME application which can the browse and explore the very good information about the technical specification of surrounding Bluetooth enabled devices and the hacker can browse device information so then all supported profiles, services records of the each device.
For download BTbrowser Download

5) BTCrawler

 The BT Crawler is the scanner for a window Mobile Based device and it scans for the other devices in a range and then performs service a query then finally it implement BlueSnarfing.
For download BTCrawler Download

CONCLUSION:

I have outlined these Bluetooth software that mostly use by the hacker to access into  cell phone. So my suggestion for all the Reader kindly switched off your Bluetooth if you don’t need of this it will save your battery and your data as well.

IMPORTANT note:

It’s just for the educational purpose. Try to use it by your risk

Please leave your valuable comment below about the Article.

Share if you Like it

Change your IP address

 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.


    Click on "Start" in the bottom left corner of the screen.
    Click on "RUN"
    Type in "command" and click OK


      You should be now at MSDOS prompt Screen

    Type "ipconfig /release" just like that, and press "enter"
    Type "exit" and leave the prompt
    Right-click on "Network Places" or "My Network Places" on your desktop.
    Click on "properties"


     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

     Right click on "Local Area Connection" and click "properties"
    Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
    Click on "Use the following IP address" under the "General" tab
    Create an IP address (It doesn't matter what it is)
    Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
    Press the "Ok" button here
    Hit the "Ok" button again


     Now you should be back to the "Local Area Connection" screen.

    Right-click back on "Local Area Connection" and go to properties again.
    Go back to the "TCP/IP" settings
    This time, select "Obtain an IP address automatically"
    Click on "Ok"
    Hit "Ok" again.
    Now you have a New IP address.

 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.

• Click on "Start" in the bottom left corner of the screen.
• Click on "RUN"
• Type in "command" and click OK

      You should be now at MSDOS prompt Screen

• Type "ipconfig /release" just like that, and press "enter"
• Type "exit" and leave the prompt
• Right-click on "Network Places" or "My Network Places" on your desktop.
• Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

•  Right click on "Local Area Connection" and click "properties"
• Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
• Click on "Use the following IP address" under the "General" tab
• Create an IP address (It doesn't matter what it is)
• Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
• Press the "Ok" button here
• Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

• Right-click back on "Local Area Connection" and go to properties again.
• Go back to the "TCP/IP" settings
• This time, select "Obtain an IP address automatically"
• Click on "Ok"
• Hit "Ok" again.
• Now you have a New IP address.

- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf

 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.

• Click on "Start" in the bottom left corner of the screen.
• Click on "RUN"
• Type in "command" and click OK

      You should be now at MSDOS prompt Screen

• Type "ipconfig /release" just like that, and press "enter"
• Type "exit" and leave the prompt
• Right-click on "Network Places" or "My Network Places" on your desktop.
• Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

•  Right click on "Local Area Connection" and click "properties"
• Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
• Click on "Use the following IP address" under the "General" tab
• Create an IP address (It doesn't matter what it is)
• Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
• Press the "Ok" button here
• Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

• Right-click back on "Local Area Connection" and go to properties again.
• Go back to the "TCP/IP" settings
• This time, select "Obtain an IP address automatically"
• Click on "Ok"
• Hit "Ok" again.
• Now you have a New IP address.

- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf

 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.

• Click on "Start" in the bottom left corner of the screen.
• Click on "RUN"
• Type in "command" and click OK

      You should be now at MSDOS prompt Screen

• Type "ipconfig /release" just like that, and press "enter"
• Type "exit" and leave the prompt
• Right-click on "Network Places" or "My Network Places" on your desktop.
• Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

•  Right click on "Local Area Connection" and click "properties"
• Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
• Click on "Use the following IP address" under the "General" tab
• Create an IP address (It doesn't matter what it is)
• Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
• Press the "Ok" button here
• Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

• Right-click back on "Local Area Connection" and go to properties again.
• Go back to the "TCP/IP" settings
• This time, select "Obtain an IP address automatically"
• Click on "Ok"
• Hit "Ok" again.
• Now you have a New IP address.

- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf

 how to change ip address in less then a minute. For now it will take 2 to 3 minutes but with some practice you can do this within a minute.

• Click on "Start" in the bottom left corner of the screen.
• Click on "RUN"
• Type in "command" and click OK

      You should be now at MSDOS prompt Screen

• Type "ipconfig /release" just like that, and press "enter"
• Type "exit" and leave the prompt
• Right-click on "Network Places" or "My Network Places" on your desktop.
• Click on "properties"

     Now you should  be on a screen with something titled "Local Area Connection", or something  similar to that, and, if you have a network hooked up, all of your other networks.

•  Right click on "Local Area Connection" and click "properties"
• Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
• Click on "Use the following IP address" under the "General" tab
• Create an IP address (It doesn't matter what it is)
• Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
• Press the "Ok" button here
• Hit the "Ok" button again

     Now you should be back to the "Local Area Connection" screen.

• Right-click back on "Local Area Connection" and go to properties again.
• Go back to the "TCP/IP" settings
• This time, select "Obtain an IP address automatically"
• Click on "Ok"
• Hit "Ok" again.
• Now you have a New IP address.

- See more at: http://www.besthacking.in/2014/03/change-your-ip-in-less-then-1-minute.html#sthash.O7LGvuxh.dpuf

NEW How To Bypass iOS 7 LockScreen & Access ANY iPhone

This work on on mostly on version of I-phones

NEW METHOD How To Bypass ANY Passcode In 5 SECONDS On iPhone 5S, 5C, 5, 4S & 4 On 7.1.1, 7.1.2, 7.1 & Below. - See more at: http://www.latesthackingnews.com/2014/06/10/new-how-to-bypass-ios-7-lockscreen-access-any-iphone/#sthash.DXmIB9VF.dpufNjknkjndvvkjckjnckjncknckjncknjckjckjnc

NEW METHOD How To Bypass ANY Passcode In 5 SECONDS On iPhone 5S, 5C, 5, 4S & 4 On 7.1.1, 7.1.2, 7.1 & Below. - See more at: http://www.latesthackingnews.com/2014/06/10/new-how-to-bypass-ios-7-lockscreen-access-any-iphone/#sthash.DXmIB9VF.dpuf

NEW METHOD How To Bypass ANY Passcode In 5 SECONDS On iPhone 5S, 5C, 5, 4S & 4 On 7.1.1, 7.1.2, 7.1 & Below.
- See more at: http://www.latesthackingnews.com/2014/06/10/new-how-to-bypass-ios-7-lockscreen-access-any-iphone/#sthash.DXmIB9VF.dpuf

NEW METHOD How To Bypass ANY Passcode In 5 SECONDS On iPhone 5S, 5C, 5, 4S & 4 On 7.1.1, 7.1.2, 7.1 & Below.
- See more at: http://www.latesthackingnews.com/2014/06/10/new-how-to-bypass-ios-7-lockscreen-access-any-iphone/#sthash.DXmIB9VF.dpuf

Removing Virus Using Command Prompt

Hello folks, today i am going to to tell you how to remove virus using command prompt. I know many antivirus are available to do this job but many of them fail to remove these suspicious virus files such as autorun.inf etc. Why don't we understand that we made tools for decreasing our efforts, tools can not defect us.
Now come to point, following steps can be used to remove a virus file using command prompt:

1.  First, press Windows Button + r then type cmd in it and press enter.
2. Open Infected drive such as write E: to go E drive.
3. Now type dir/w/a . It will show all the files of the drive including hidden files.
4. Locate your virus file name i am using AUTORUN.INF.
5. Type command attrib  -r –a –s –h to remove attributes of corresponding file.
6. Now type del virus name.exe t delete it, eg : del newfolder.exe

and you are done, you can also delete viruses by using following steps:

Syntax for rename is (rename filename.extension new name ,  for example: (rename autorun.inf virus) to rename autorun.inf file. Here I have renamed it by “virusfile”.

1. Now you can access the defected drive without affecting the virus.
2. To delete the renamed file go to the defected drive and select the file you renamed, and delete it.

You have deleted that virus successfully but sometimes virus resides in the Recycler folder.To locate this folder:

1. Type cd recycler command.
2. Again type dir/w/a  to locate all file of the folder.
3. Identify malicious files and delete them using above commands.

Note: Make sure that no other processes being running while performing these actions.

:)

Unknown Bug in Microsoft Word

Microsoft word trick still works in latest versions of MS Word and Bill Gates still don’t know why it happens

Try it yourself: 
1. Open Microsoft word and type  =rand(200,99)
2. Hit enter and see what happens.

NOTE: It won’t hurt your system. 

5 Best Command prompt Tricks

Before moving futher with the Tricks, let me show you how to Open Command prompt in various Windows versions.

Press Win + R keys to open up RUN, type in CMD and press enter to open Command Prompt.

OR

Simply Search for CMD or Command prompt and click on it to open Command Prompt in your Windows PC

1. Change Colours in CMD:

By default CMD have Black Background, but you can change its Background Color and font color too. Follow the Below steps to Play with Colors in Command prompt.

Step 1: Open Command prompt

Step 2. Type in Color 3 to change the Font color to Green. Different Colors have thier own different Codes. here are some Codes that you can try and use

0 = Black

1 = Blue

2 = Green

3 = Aqua

4 = Red

5 = Purple

6 = Yellow

7 = White

8 = Gray

9 = Light Blue

A = Light Green

B = Light Aqua

C = Light Red

D = Light Purple

E = Light Yellow

F = Bright White

Step 3: To change the Background Color of your CMD, simply Right Click on Top of your CMD and choose Properties.

Step 4: Now Click on Colors tab to choose your favourite color as Background color.

2. Check your I.P address and more about your internet.

With the help of Command Prompt you can easily find your IP address and DNS servers, command prompt will also return a ton of information like your host name, primary DNS suffix, node type, whether IP Routing, Wins Proxy, and DHCP are enabled, your network adapter`s description, your physical(MAC) address.

Step 1: Open CMD

Step 2 : Type in ipconfig /all

This will show you all the details about your internet Connection just like that.